FurnityurMolds

FurnityurMolds

Sunday, January 5, 2014

Master class #3. Tutorial. Transparent floral bracelet.

In this master class you'll find instruction how to create transparent bracelet with the help of epoxy resin and silicone mold.



http://furnityurmolds.blogspot.com/2016/02/discounts-up-to-15.html

You need:
  • silicone mold for epoxy resin
  •  two component epoxy resin
  • some bowl to mix resin
  •  stick for miximg
  • dried leaves
  • toothpick
  • scissors
  • oven


 You can buy our bracelet silicone molds for epoxy resin on Dawanda or Etsy.




1. Wash mold to remove dust.
2. Mix epoxy resin (3 parts resin to 1 part hardener), 
 to an even consistency, set aside to come out all the bubbles.


3. Prepare the dry leaves - choose smooth, beautiful. 
Cut them a little if it's necessary to prevent leaves peeking from the mold.
 4. Pour carefully epoxy resin into the mold.



5. Put leaves into the mold.


6. Next, we need an oven to make out the remains of bubbles out of resin, as well as to accelerate the hardening of our bracelet. Preheat oven to 80oC / 176oF , turn it off, and  ventilate a little. Than put the mold into the oven for 10-15min



7. Now bracelet has completely hardened, remove it from the mold. Do it gently, without sudden movements, it is removed very easily.


8. Now you need to polish it and lacquer. 



The bracelet is ready!




Master class was made by  Nataly Grin.



https://www.zibbet.com/furnityurmolds
https://www.etsy.com/shop/MoldsCorporationhttp://en.dawanda.com/shop/FurnityurMolds 

 Our shops


  
 Follow us
https://twitter.com/MoldMarket https://www.facebook.com/pages/FurnityurMolds/252245978224625?ref=br_rs

4 comments:

  1. This is beautiful, Nataly... thank you for sharing your method :)

    ReplyDelete
  2. The resin I use is wonderful and clear but when I put in embedments it creates many tiny bubbles. Does putting any resin into the oven for 10-15 minutes always get rid of every bubble?!

    ReplyDelete